Comparison of Different Cleaning Methods
Hot air gun + Alcohol + PCB wash water
1. Hand washing leads to significant differences in effect.
2. It is impossible to thoroughly clean the nozzle cavity and the surface of the nozzle.
3. The cleaning solution may penetrate and cause the reflective layer to peel off.
Ultrasonic cleaner
- Nozzles collide with each other, causing the black surface to chip off.
- It is impossible to thoroughly clean the nozzle cavity and the surface of the nozzle.
- The cleaning solution may penetrate and cause the reflective layer to peel off.
Nozzle Cleaning Machine
- Pure pneumatic cleaning is safer;
- Extends the lifespan of the nozzles;
- Non-destructive to surface coatings and reflectors;
- Uses environmentally friendly ionized water for cleaning;
- Automatic continuous cleaning and drying;
- Simple operation, improves quality;
- Suitable for various types of pick-and-place machine nozzles;
- Can accommodate the cleaning of 30 nozzles at one time.
Suitable for ALL Pick and Place Machine Nozzle Cleaning
Panasonic Fuji Siemens Yamaha Juki ASMPT Mycronic Hanwha Evest Europlacer
C700 Nozzle Cleaning Machine
The suction nozzle cleaning machine adopts multi-nozzle spraying cleaning mode, and uses fluid mechanics
to break water to generate extremely fine water mist, which forms strong kinetic energy to spray onto the suction
nozzle at the speed of sound. A continuous energy field is formed above the suction nozzle to be cleaned, crushing
dirt on the surface and inside of the suction nozzle. The machine does not need any solvent and can be cleaned with
industrial purified water.
Cleaning: The machine is fully automatic with 30 suction nozzles cleaned each time. Different types of suction
nozzles are equipped with different jig trays. Suction nozzles of any type of mounter can be cleaned, and
compressed air can blow dry automatically after cleaning.
Testing: Take out the jig tray and put it on a special suction nozzle inspection machine for inspection. The real
cleaning condition of the suction nozzle after cleaning can be observed.
- The equipment adopts 3 nozzles to clean 30 suction nozzles in 10 rows sequentially, achieving high efficiency and energy saving.
- Full inspection window facilitates maintenance and operation.
- All parts in contact with water are made of 304 stainless steel, rust-proof, corrosion-resistant, and sturdy.
- Humanized design allows one-touch start and stop via external buttons.
- Utilizes touchscreen + PLC distributed control for stable and reliable performance.
- Easy operation with a simple interface and the ability to switch between Chinese and English at any time.
- Equipped with misoperation alarm and emergency braking system, with overload protection.
- Uses environmentally friendly, pollution-free industrial pure water (HP value 5-7 soft water) or filtered pure water.
- Waste is centrally collected for convenient maintenance.
| Device Model | C700 |
|---|---|
| Device Name | C700 Nozzle Cleaning Machine for Pick and Place Machine |
| Dimension(LxWxH) | 520mm × 450mm × 620mm |
| Power supply | 250W |
| Gas pressure | 0.5 - 0.6MPa (during normal operation) |
| Weight | Approximately 40kg |
| Total power | 200W |
| Control method | Touchscreen + PLC |
| Gas | Purified compressed air |
| Jet pressure | 0.4 MPa |
| Air consumption | Below 280NL/min |
| Liquid type | Industrial purified water |
| Liquid consumption | 300cc/hour |
| Liquid storage capacity | 800cc |
| Inlet pipe / Drainage pipe | Φ8 / Φ6 |
| Nozzle tray specifications | Default single row, 3 nozzles per row, 10 rows, total of 30 nozzles |
| Cleaning nozzle specifications | 0402, 0201, 01005, 03015 |
