C750 Автоматическая водная машина для очистки трафаретов

• Специально разработан для очистки трафаретов, плат с опечатками, PCB/PCBA и т.д. с помощью системы распыления под высоким давлением с использованием водных чистящих растворов.
• Двойные резервуары для жидкостей, оснащенные системой подогрева, удовлетворяют потребности в очистке, ополаскивании и сушке горячим воздухом.
• Process flow: Cleaning – Chemical Isolation – Rinsing (Open loop/Closed loop) – Drying.
• Equipped with advanced fully automatic touch screen operation software, saving program files, making use extremely simplified.
• System counting function, which can automatically tally the number of cleaned stencils and the number of filtration cycles.
• Давление жидкости и насоса отображается на панели манометра, обеспечивая своевременную обратную связь с работой оборудования.
• Давление распыления контролируется датчиком давления, который подает сигнал тревоги, если оно выходит за пределы установленного диапазона.
• Контроль удельного сопротивления промывочной жидкости обеспечивает чистоту; удельное сопротивление можно регулировать в соответствии с различными требованиями к процессу нанесения трафаретов.
• Прямой возврат жидкости снижает ее расход.
• Корпус из нержавеющей стали прочен и долговечен, устойчив к кислотным и щелочным чистящим растворам.
• Вода для ополаскивания может быть отфильтрована через ионную фильтрацию для долговременного отсутствия выделений.
• High-pressure air blower + hot air drying for a faster and more thorough drying effect.
• Снижение эксплуатационных расходов; для каждой очистки требуется всего 30-120 мл жидкости. После очистки сжатый воздух используется для восстановления остатков жидкости в трубопроводе и насосе, что позволяет сократить расход жидкости на 50%.

1. How is the cleaning effect of your equipment? Can it be thoroughly cleaned?
A:Of course! Our equipment uses high-pressure spraying + precision filtration technology, which can effectively remove solder paste, red glue and flux residues on the steel mesh to ensure the cleanliness of the steel mesh. At the same time, there is a drying function after cleaning to ensure that the steel mesh is dry and has no residue, and can be put into use immediately.

2. Will the steel mesh be damaged during cleaning?
A:Not at all! Our equipment uses a gentle but efficient cleaning method, which will not cause any damage to the steel mesh during the cleaning process, while avoiding the problems of mesh clogging or deformation that may be caused by traditional manual cleaning. Many customers have reported after use that the service life of the steel mesh has been significantly extended.

3. What kind of cleaning agents can be used in your cleaning machine? Is it environmentally friendly?
A:Our cleaning machine is compatible with solvent-based and water-based cleaning agents, ensuring the cleaning effect while meeting the industry’s environmental standards. Compared with traditional chemical cleaning methods, our equipment is safe and pollution-free.

4. Will the operation be complicated? Do I need professional training?
A:No! Our equipment is equipped with an intelligent touch screen operating system, which can be started with one button and automatically completes cleaning, rinsing and drying. It is simple and easy to learn, and ordinary employees can easily get started. If necessary, we can also provide detailed operation training to ensure that your team can use it smoothly.

5. Is it difficult to maintain the equipment? Is the later cost high?
A:Our equipment design is very user-friendly, simple to maintain and low cost. You only need to regularly replace the cleaning agent and check the filter system, and other parts are basically maintenance-free. We also provide comprehensive after-sales service and technical support to keep your equipment in the best working condition for a long time.

6. What stencils are suitable for your cleaning machine?
A:Our equipment is suitable for SMT steel mesh, copper mesh, silk screen, microporous mesh, and wafer discs of various sizes. If you are not sure whether it is suitable for your stencil, you can contact us and we will recommend the most suitable model according to your needs.

7.Can your stencil cleaning machine improve production efficiency?
A:Of course! It usually takes 3-10 minutes to clean a stencil, which is much faster and more effective than traditional manual cleaning. It also has a stable cleaning effect. It reduces printing defects caused by unclean stencils, improves production yield, and ultimately helps you reduce costs and increase production capacity.