Macchina per la pulizia dei PCB C753
Fully automatic PCB surface cleaning machine, suitable for online cleaning before solder paste printing or adhesive coating. It mainly removes fine debris, dust, fibers, hair, skin flakes, metal particles, and other foreign objects from the surface of PCB pads, ensuring the PCB surface is in a clean state. By eliminating soldering defects such as solder balls, voids, warpage, and misalignment in advance, it reduces potential risks and improves product quality. Specifically designed equipment developed according to the cleaning needs of SMT production lines. Equipped with standard antistatic function, completely eliminating static interference. Contact cleaning method with a cleaning rate of over 99%, ensuring efficient, stable, and long-lasting cleaning results.
The fully automatic PCB cleaning machine is a cutting-edge surface cleaning system that employs two dust-adhesive rollers to collect dust from the surface of PCBs. High-pressure ionized air is then used to remove debris such as flakes, fibers, hair, and powder particles. Subsequently, the dust-adhesive rollers come into direct contact with adhesive paper to collect pollutants from the rollers. This process ensures that the PCB surface is clean before printing, preemptively eliminating soldering defects and enhancing product quality. Simply press the pneumatic button to initiate the operation, making it simple and convenient to use.
- Equipped with a touchscreen control interface for simple and easy operation.
- La direzione di alimentazione del binario può essere cambiata liberamente, da sinistra a destra o da destra a sinistra.
- Front end features a brush function for enhanced ability to remove debris and hair.
- Antistatic devices are attached at both PCB entry and exit points, reducing instances of defective mounting and static damage during the mounting process.
- Includes counting function and numerical control speed display.
- Reminder function for replacing adhesive paper rolls.
- Specifically designed antistatic cleaning brush and vacuum suction device developed to meet high cleanliness requirements of PCBs, ensuring efficient and stable cleaning results.
Modello del dispositivo | Macchina per la pulizia dei PCB C753 | Remarks |
---|---|---|
Dimensione del PCB | 50x50~450x350 (LxW)mm | Corresponding to other models for large-sized boards |
Spessore del PCB | 0.5~3.2mm | Special corresponding for boards below 0.4mm |
Conveyor Height | 900±25 mm | |
Cleaning Brush | 1 piece | |
Vacuum Cleaning Device | 1 set | |
Adhesive Dust Rollers | Two each, front and rear | |
Adhesive Dust Paper | One roll | |
Track Direction | Left → Right or Right → Left, optional | |
Track Fixed Side | Front fixed or Rear fixed, optional | |
Track Width Adjustment | Manual, with optional automatic adjustment | |
Anti-static Device | Built-in, special device optional | |
Air Supply | 0.4-0.5MPa | |
Alimentazione elettrica | AC220V, 50HZ | Special voltage requirements must be specified |
Dimensions (mm) | 890X610X1410 | |
Peso | 140KG |