C740 Máquina limpiadora de esténciles a base de agua

• Sistema de pulverización de alta presión diseñado específicamente para la limpieza de placas, impresiones erróneas, PCB/PCBA, etc., utilizando una solución de limpieza a base de agua.
• Equipada con depósitos de líquido dobles y sistemas de calefacción para satisfacer los requisitos de limpieza, aclarado y secado con aire caliente.
• Flujo del proceso: Limpieza - Química.
• Controla la resistividad de la solución de enjuague para garantizar la limpieza; la resistividad se puede ajustar para satisfacer los diferentes requisitos del proceso de estarcido.
• El reflujo directo de líquido reduce el consumo de líquido.
• El cuerpo general de acero inoxidable es robusto y duradero, resistente a soluciones ácidas, alcalinas y otras soluciones de limpieza.
• El agua de aclarado puede conseguir un vertido cero a largo plazo gracias a la filtración iónica.
• Ventilador de alta presión + secado por aire caliente para un secado más rápido y completo.
• Menores costes de funcionamiento; sólo se necesitan entre 30 y 120 ml de líquido por ciclo de limpieza, y se utiliza aire comprimido para recuperar el líquido residual a través de tuberías y bombas tras la limpieza, lo que reduce el consumo de líquido en 50%.

1. How is the cleaning effect of your equipment? Can it be thoroughly cleaned?
A:Of course! Our equipment uses high-pressure spraying + precision filtration technology, which can effectively remove solder paste, red glue and flux residues on the steel mesh to ensure the cleanliness of the steel mesh. At the same time, there is a drying function after cleaning to ensure that the steel mesh is dry and has no residue, and can be put into use immediately.

2. Will the steel mesh be damaged during cleaning?
A:Not at all! Our equipment uses a gentle but efficient cleaning method, which will not cause any damage to the steel mesh during the cleaning process, while avoiding the problems of mesh clogging or deformation that may be caused by traditional manual cleaning. Many customers have reported after use that the service life of the steel mesh has been significantly extended.

3. What kind of cleaning agents can be used in your cleaning machine? Is it environmentally friendly?
A:Our cleaning machine is compatible with solvent-based and water-based cleaning agents, ensuring the cleaning effect while meeting the industry’s environmental standards. Compared with traditional chemical cleaning methods, our equipment is safe and pollution-free.

4. Will the operation be complicated? Do I need professional training?
A:No! Our equipment is equipped with an intelligent touch screen operating system, which can be started with one button and automatically completes cleaning, rinsing and drying. It is simple and easy to learn, and ordinary employees can easily get started. If necessary, we can also provide detailed operation training to ensure that your team can use it smoothly.

5. Is it difficult to maintain the equipment? Is the later cost high?
A:Our equipment design is very user-friendly, simple to maintain and low cost. You only need to regularly replace the cleaning agent and check the filter system, and other parts are basically maintenance-free. We also provide comprehensive after-sales service and technical support to keep your equipment in the best working condition for a long time.

6. What stencils are suitable for your cleaning machine?
A:Our equipment is suitable for SMT steel mesh, copper mesh, silk screen, microporous mesh, and wafer discs of various sizes. If you are not sure whether it is suitable for your stencil, you can contact us and we will recommend the most suitable model according to your needs.

7.Can your stencil cleaning machine improve production efficiency?
A:Of course! It usually takes 3-10 minutes to clean a stencil, which is much faster and more effective than traditional manual cleaning. It also has a stable cleaning effect. It reduces printing defects caused by unclean stencils, improves production yield, and ultimately helps you reduce costs and increase production capacity.